ARRIS/Cisco Setting WiFi Channel to Auto

In order to change WiFi channel to AUTO please follow the below steps:

  • Log-in to your Modem Interface by opening a web browser and type in the address bar 192.168.0.1 and press Enter

Capture

N.B – You will have to be connected directly with the modem and no router should be present.

For CISCO Modem;

  • You will be redirected to the user interface where you will be prompted to input Username Password.

Capture

  • Leave your username and password empty and click on Log in.
  • The modem’s interface is now displayed. To change the wireless frequency, click on Wireless and Radio Settings (as shown below).

Capture

  • Once you are in the Radio Settings section, change the Channel Width and the Channel both to Auto.

Capture

  • Click Save Settings, close your browser and check your connection.

For ARRIS Modem;

  • You will be redirected to the user interface where you will be prompted to input Username Password.

Capture2

  • Type admin as Username & password as password in order to log-in.
  • You will be redirected to the Basic Setup page, select weather you are going to change the 2.4Ghz or 5Ghz channel.

Capture

  • Make sure that channel is set to Auto to get the best WiFi performance possible.

Capture


Still need help? Our support team is waiting to help you. Ask them now