Melita HD box LED light information

Melita HD Netbox

1.  LED off:

If the front LED light on your Melita HD Netbox is not on, it means that it is not powered on from the electricity. To use your Melita HD Netbox, be sure to check that the power cable is connected to the wall plug and confirm that the switch is in on. If you just powered on the Melita HD Netbox, you should notice that the LED light starts blinking, and after a few seconds the LED light should turn to steady bright.

2.  LED steady bright:

A bright and steady LED light indicates that your Melita HD Netbox is on and fully operational.

3.  LED steady dim:

A steady dim LED light indicates that your Melita HD Netbox is on Stand-By mode. To turn it on, press the Power button from the Melita HD remote control just once. The LED light should flash twice and then turn to a steady bright state.

4.  LED blinking every second:

The Melita HD Netbox LED light can be observed blinking every second during start-up. This state indicates that Melita HD Netbox is loading the operating system and respective configuration. The software should be fully loaded and ready for use in a few seconds. Once the Melita HD Netbox is ready for use, the LED light will turn to steady bright.

5.  LED pulses every 6 seconds:

If the LED light is pulsing every 6 seconds, your Melita HD Netbox is in sleep mode. To turn it on, press and hold the Power button for five seconds. The LED light should start blinking in one second intervals and shortly after the LED turns to steady bright indicating that your Melita HD Netbox is ready for use.

 

Melita HD iBox

1.  LED off:

If the front LED light is not on, it means that your Melita HD iBox is either not powered on, on Stand-By mode or on sleep mode. To use your Melita HD iBox, be sure to check that the power cable is connected to the wall plug, and confirm that the switch is on. Then proceed by pressing the iBox power button or alternatively from the Melita HD remote control. If you just powered on the Melita HD iBox, you should notice that the LED light starts blinking and after a few seconds, the LED light should turn to steady bright.

 2.  LED steady bright:

A bright and steady LED light indicates that your Melita HD iBox is on and fully operational.

3.  LED blinking every second:

The Melita HD iBox LED light can be observed blinking every second during start-up. This state indicates that the Melita HD iBox is loading the operating system and respective configuration. The software should be fully loaded and ready for use in a few seconds. Once the Melita HD iBox is ready for use, the LED light will turn to steady bright.


Still need help? Our support team is waiting to help you. Ask them now